Wind Power

I haven't posted anything in a while because I am teaching this semester (Earth Resources and the Environment), which has made me incredibly busy, and also I was playing a computer game for the past month. Anyways, some friends told me they actually read this, so I am gonna start up again.

Today we discuss how wind power works, how a wind turbine works, and limitations on placement of wind turbines.

Block diagram of a wind turbine. Wind spins the blades, which in turn goes through a transmission to spin a turbine to produce electricity.

Block diagram of a wind turbine. Wind spins the blades, which in turn goes through a transmission to spin a turbine to produce electricity.

Wind power harnesses the power of wind to turn a turbine. Unlike every other power plant we have discussed, this is not a thermal plant. How does wind even happen? As we all know, the sun shines more directly near the equator than it does the poles. And so the equator is heated more than the poles. The Earth doesn't like having one part heated and another not, so the major prevalent winds are the way the Earth redistributes this uneven heating from the equator to the poles. Smaller winds are local manifestations of this phenomenon. In short, wind power is extracting the energy deposited by the sun.

Next: the design

The mechanical design of a wind turbine. Link

The rotors of a wind turbine catch the wind, and thanks to Bernoulli's principle, the wind forces the turbine to spin. Think of it as creating an area of low pressure behind the blade, so the blade is getting sucked, or pulled, rather than pushed in a circle. These blades are attached to a hub, which spins with it. The entire box behind the turbines is called the Nacelle, and contains all the parts that produce power. The hub itself spins somewhat slowly, but thanks to a gearbox, the shaft that goes to the generator spins much more rapidly. The windvane senses the wind direction, and a motor beneath the hub rotates the entire turbine to face directly into the wind.

Wind power plants face four primary limitations. First, they don't work when wind isn't blowing. So you aren't placing these things in windless or low-wind locations. Second, depending on the design of the turbine, each has a maximum wind speed where it most efficiently extract energy. In fact, during high winds, they have to shut down to prevent damage. Third, there is a factor called the Betz limit that indicates that the most energy you can extract from wind is about 60%. In reality, the best might be 45% efficient. A corollary fourth limit is that you cannot place wind farms too closely, because they become far less efficient if you place them nearby. They literally suck out the power from the wind. In the end, availability of location is the most important

This photo from NOAA uses LIDAR to track the turbulence produced in the wake of wind turbines. It visually depicts the limitations of putting turbines in the same place. The turbulence behind the turbines can damage the props on the next turbine, requiring further replacement. It also reduces the efficacy of the next turbine. link to NOAA.

Ultimately, the largest problem is where to site wind farms. You can't put them in places without wind, or you spend a ton of money on them and they don't return the payment.

This map indicates regions and their use for wind farms. It shows that many areas are not great for wind farms. Click the link for a more detailed image.

There are two closely linked issues associated with wind power. In most places, wind does not always blow. When the wind is not blowing, power cannot be extracted. This is called intermittency. It means that wind power cannot provide baseload power. In some places, like California, the intermittency is dealt with by power up peaking gas-powered power plants. In other places, the intermittency is seen as an insurmountable issue (California surmounted it. Those other places are foolish.) Other methods of dealing with it are compressed air storage (more on that later), batteries, and pumped hydro (more on that later).

Another important feature of wind turbines is size. To get more power from a single turbine and reap larger economies of scale, you build a taller turbine. Also, taller turbines reach farther up into the part of sky where wind it a bit more constant. But those huge turbines, that can produce up to 5MW each (recall a larger power plant is 1000MW), are relatively new. We are not sure how long they last in the wild. Maybe 50 years (like a normal power plant) or maybe 20. This is important, because per MW, wind power used more resources to build than almost anything else.

Now, offshore wind is a different beast entirely.

Offshore wind turbines become progressively more expensive as you move to deeper waters.

Offshore wind turbines become progressively more expensive as you move to deeper waters.

These things need to be moored to the ocean floor, or have very expensive floats. It can increase production cost by a factor of three. Ameliorating this fact is that wind is often more consistent offshore. But these things face waves, corrosive ocean water, severe storms, etc., and need to be built very strong, increasing costs. Moreover, they need a way to connect them together, and then very powerful regional lines to transfer the power to mainland. Expensive. If you remember my post comparing the cost of nuclear power to other types, offshore wind is mad expensive.

Another interesting point about wind power (and solar): they produce DC power. This is direct current, like a battery. The power we get from the wall is AC power. It alternates. Anything with a motor likes AC power a lot. Many electronics prefer DC power, hence needing AC adapters for all your electronics. Batteries use DC. Another fun fact about AC vs DC? Electricity make your muscles constrict. If you grab something with AC, since it alternates you let go. You grab something with DC, like a car battery or a taser while being arrested, that stuff causes constriction and you can't let go. Point is, stay away from DC electricity.

Back to the point: Somewhere in the process, whether at the turbine or at a collection station, this electricity needs to be converted to AC to use on the electrical grid. More expenses. In short, offshore wind is incredibly expensive, and only for countries that are afraid of nuclear power. In a later article, I hope to compare the resource costs per MW of constructing each of these types of power plants.

Thanks for reading again!

-jason munster

 

Oil Refining

Today's post is about something important that I entirely took for granted that most people don't know about. Oil refining.

Oil refinery, pic from eia.

For those five of you that read last week's post and wondered where I got all that from, a lot of that information came from books on geopolitics and a course called Geopolitics of energy. More or less, geopolitics goes far beyond your government course to include geographic/geologic/demographic constraints.

Anyways. Refining. No equations here. Sorry if you like those.

Basically, refineries buy crude oil and distill it to usable products based on the fact that crude oil is a mix of a bunch of different products. Your typical barrel of low-grade crude from Venezuela will have 40% of a substance that can be only used as road tar. This is called residuum. Chemically speaking, it is chains of long, heavy molecules, not useful for much. More chemically speaking, the Van Der Waal's forces, which are based on molecular mass, attract these to each other, so they are sticky and have high boiling points.

Distillation temperatures (and a rock block diagram of a refining tower) of different crude oil components. from EIA.gov

How do these get separated? By their different boiling points! Refineries are towers. Everything at the bottom is very hot, so just about everything boils. Farther up the heaviest stuff with the highest boiling points will condense out to liquid phase, while stuff with lower boiling points will stay in the gas phase. This pattern continues all the way up, until the different products are fully taken out.

A schematic of a refining tower. Nearly everything in the bottom is volatile (gas phase). As you move up in the tower, temperature drops, and the heaviest items condensate out in liquid form, collect in trays, and are removed. source: chevron Pascagoula

Gasoline is amongst the most valuable commodity pulled out of a barrel of crude. Diesel in the US is more valuable if it can make its way to the east coast, where it can be shipped to Europe. Why does Europe use more diesel than the US? Cause the gasoline tax there is much higher than the diesel tax. So the price for gasoline is artificially raised very high, and then the price for diesel (which can be substituted for gasoline in most applications) rises to something underneath gasoline. Since petroleum products are a globally traded good, the price of diesel in the US is directly affected.

Barrels of oil are not created equal. Stuff coming out of Saudi Arabia can produce a lot of gasoline (we are talking nearly 70 or 80%). Stuff coming out of the Canadian tar sands might produce closer to 20%, and have a ton of residuum. A barrel of Canadian tar sand oil is thus worth much less than a barrel of Saudi crude. Note: the Bakken produces a barrel that is even better than Saudi. It is some of the best in the world. It is worth less at the well head (where it comes from the ground) than other barrels. Cause the Bakken developed so rapidly that there is not enough transport capacity. This elucidates another important point. Refineries buy crude oil.

Hokay, next stop on refineries: different types. The crude that comes from Venezuela and the Canadian tar sands is incredibly low quality. It is filled with heavy stuff. In order to distill it, it needs to go to special refineries. It turns out that Texas and the American South are one of the few places that can handle this super thick sludge. So Venezuela can complain all they want about the US, but their only buyer for their product is currently the US. No one else has the ability to process it. What about Canadian tar sands and Keystone XL? Most of us have heard that China is willing to buy that stuff, and they will if Keystone does not go in. It would be pretty easy for that stuff to be shipped to the coast, and if China could have a guaranteed supply of it for years, it would be worth it for them to build refining capacity for that thick sludge. So if we don't build Keystone or develop rail capacity to buy that junk from Canada, then China will.

How much money does refining oil make? A couple of dollars per barrel. Compared to Saudi Arabia making nearly $100 a barrel, this doesn't seem like much. But given there are 80 million barrels of oil used a day in the world, that means there is somewhere between $100 and $150 million per day to be made in the world by refining oil. If you are Exxon and don't have all that much access to produce in a Saudi oil field, this could be a great option.

Okay. That's about it. Thanks for reading.

-Jason Munster

Oil exports and imports

I am going to be lazy this week and post a very short one.

We discussed the Bakken before. It is producing nearly a million barrels a day of oil. This is $100 million in oil sales a day. It costs up to $45/barrel to lift the oil out of the bakken. The Bakken makes profits of about $50 million a day, or about $18 billion a year.

Let's compare this to Saudi Arabia. They pull oil out of the ground for $1 per barrel (it is very efficient there). They make profits of roughly $100/barrel. They produce 12 million barrels a day. In other words, they make $1.2 billion per day.

The US currently imports 11 million barrels of oil per day, and we use a total of 20 million. We transfer about $1.1 billion out of the US per day to drive cars.

What is the end product of this money? Many countries with oil have what is called the "resource curse." It is also known as Dutch disease. It turns out if your country has a ton of natural resources, it becomes inefficient and actually has less growth than it would have otherwise. This has several reasons. First, if a government makes a ton of oil money (or copper or gems), they tend to provide stuff for free to the populace. They take the money they make and just use it to pay for social things, like schools, hospitals, etc. Citizens pay less or no taxes. Corruption and handouts tend to be rife, but since the citizenry gets stuff for free, they don't even care. It is highly inefficient, and the country does not develop a real economy. They often will not use the money to diversify the economy, and once the resource runs out, the country is literally worse off than it was before they found the resource. Finally, having resources tends to allow despotic regimes to thrive. Iraq, Iran, Venezuela,

Interesting, eh? Maybe is a good reason to drive a fuel efficient car. Except that China and India and other developing countries with increasing numbers of cars will ensure every barrel of oil finds a buyer.

One last thing. The US gets its oil imports almost entirely from North America, from Mexico and Canada. The Middle East oil goes to China and the rest of the east. Why does the US spend so much money to maintain peace in the Middle East? Cause if the oil produced there came off the market, the former buyers will have to go elsewhere to buy their oil. Despite the fact that we don't get oil from the middle east, the global price (and our price) is much lower than it would be if war caused the oil to stop flowing from there. So why doesn't China start also enforcing peace in the Middle East? How come the US is the major country to fund this peace keeping? Frankly put, no other country has the experience of the US with having troops on foreign soil. China doesn't yet have the experience to effectively do this sort of thing. But they are already practicing. Eventually, as China continues to rise, they will likely begin to shoulder responsibility of ensuring the flow of oil.

Nuclear Reactors Final

I am getting bored of this topic, and I want to get to wind-solar-hydro so I can finish up with the energy technology stuff and write varied stuff. So I am going to compress it a lot. If anyone wants to see it expanded, let me know and I will take care of it later.

This post is about breeder reactors, thorium reactors, preventing nuclear proliferation, how the electricity costs stack up to other power plants, and why nuclear power is so expensive.

Nuclear power is expensive because the up-front costs are massive. The cleanest and most efficient coal fired power plants might cost a billion dollars to build. It might take 5 years to build it. Nuclear power plants seem to cost about $8 billion to build with all the safety features they use to prevent nuclear meltdowns (seriously, the new tech is very safe, and it shows in the cost). And they seem to take 8-15 years to build, depending on how much Greenpeace or pretty much every other group tries to stop construction via litigation. In other words, they take out an $8B loan and accrue interest for 8-15 years before they can start paying it back. Stuff costs a lot. Why do it? Cause nuclear waste can be contained, unlike the NOx and CO2 from natural gas and coal plants. Also, South Korea thinks it can build a nuclear plant a nuclear power plant in a short amount of time for only $5 billion. United Arab Emirates decided this was a good idea, and is buying four South Korean nuclear reactors to desalinate water.

Schematic of the South Korean nuclear power plant to be built in the United Arab Emirates, from link above.

The US Energy Administration Administration agrees that nuclear power is now less expensive than it used to be. I have ripped a table straight off their web page that shows it (see, I really am getting lazy in this post).

Table 1. Estimated levelized cost of new generation resources, 2018 
U.S. average levelized costs (2011 $/megawatthour) for plants entering service in 2018
Plant type Capacity factor (%) Levelized capital cost Fixed O&M Variable O&M (including fuel) Transmission investment Total system levelized cost
Dispatchable Technologies
Conventional Coal 85 65.7 4.1 29.2 1.2 100.1
Advanced Coal 85 84.4 6.8 30.7 1.2 123.0
Advanced Coal with CCS 85 88.4 8.8 37.2 1.2 135.5
Natural Gas-fired
Conventional Combined Cycle 87 15.8 1.7 48.4 1.2 67.1
Advanced Combined Cycle 87 17.4 2.0 45.0 1.2 65.6
Advanced CC with CCS 87 34.0 4.1 54.1 1.2 93.4
Conventional Combustion Turbine 30 44.2 2.7 80.0 3.4 130.3
Advanced Combustion Turbine 30 30.4 2.6 68.2 3.4 104.6
Advanced Nuclear 90 83.4 11.6 12.3 1.1 108.4
Geothermal 92 76.2 12.0 0.0 1.4 89.6
Biomass 83 53.2 14.3 42.3 1.2 111.0
Non-Dispatchable Technologies
Wind 34 70.3 13.1 0.0 3.2 86.6
Wind-Offshore 37 193.4 22.4 0.0 5.7 221.5
Solar PV1 25 130.4 9.9 0.0 4.0 144.3
Solar Thermal 20 214.2 41.4 0.0 5.9 261.5
Hydro2 52 78.1 4.1 6.1 2.0 90.3

 

Note that last column is $ per megawatt hour. It is the bottom line cost of producing power from that plant. First, what is dispatchable vs non-dispatchable? Dispatchable means you get it whenever you want it. You can ramp it up or down however you please. Non-dispatchable means that you depend on external factors, like the fickle winds of.. well.. winds?

Tangent! Winds are really just redistribution of energy from the equator to the poles. The sun shines more at the equator, heating it up, and then energy likes to move from areas of high energy to areas of low energy, so it does it using wind. And sometimes hurricanes. So really, wind power is just really inefficient solar power. You know what else is really inefficient (and slow) solar power? Hydrocarbons and coal. Cause they are really just buried plant and algae matter and such. That is tens to hundreds of millions of years old. So, coal and oil are really just really old, slow, and dirty solar power. Tangent done!

Tangent picture? This shows how the equator heats more than the rest of the earth. These extra heat has to redistribute to be more even. Hurricanes start near the equator cause of the heat there, then move away from it. from: http://oceanworld.tamu.edu/resources/oceanography-book/oceansandclimate.htm

Nuclear power is almost as cheap as coal power, and cheaper than clean coal (note, clean coal still produces a ton of CO and NO)! What gives? How is nuclear so inexpensive? Well, we haven't built a nuclear power plant in the US in years. We don't know what it will actually cost. Those are just estimates. Also, people are quite scared of nuclear power. The cost of building nuclear power rises when you have environmentalists and NIMBY folks suing the pants off nuclear power developers. But let's make one thing clear: if the new generation of nuclear power plants are as inexpensive as they are supposed to be, the power is less expensive that all other power plants other than natural gas (note: the US does not have capacity to build more hydro power), and less expensive than even that if you account for NO produced by and methane leaks associated with natural gas power (methane production and transport will always have leaks, and it is 23x as powerful a greenhouse agent as CO2).

Let's look at a few more things on the chart above. Remember when I said natural gas got cheap? Look at how cheap it is to produce power from natural gas on the chart above. Think anyone is building nuclear, solar, or offshore wind when you can build and deploy reliable natural gas power? Somehow, the answer to this is yes. Yes, people are building all these things, despite being expensive. Which is kind of cool.

Before moving away from costs, look at the variable costs. The variable costs are high for everything except renewables and nuclear. Why is this? Cause renewables and nuclear don't really use fuel. Yes, a nuclear plant uses fuel, but it costs almost nothing relative to the labor and the capital costs. All the cost of these is upfront CAPEX (capital expense), and then you get free power.

Finally, lets take a really close look at the variable costs. This link is pretty sweet for those of you interested. It contains variable costs for each power source. You can see that fuel is the bulk of cost of fossil steam plants, but less than a quarter of the total cost of nuclear, and nuclear fuel is 1/4 the price per energy unit than even dirt cheap natural gas.

Enough about costs! Onto breeder reactors!

In the first post I mentioned that one part of nuclear reactions is to give off neutrons. Sometimes instead of a neutron splitting an atom, the atom absorbs it. U-235 is the uranium we use in nuclear reactors. U-238 doesn't produce as much heat, cause it doesn't like to decay as fast, so it isn't viable nuclear fuel. Or is it?! U-238 is like a catcher in baseball. Except it catches neutrons. And then it incorporates them into its nucleus to become U-239. In other words, it really isn't like a catcher in baseball.

The breeder reaction series. From: http://nuclearpowertraining.tpub.com/h1019v1/css/h1019v1_76.htm

What's special about U-239? It decays rapidly through a special type of decay to become neptunium-239 and eventually plutonium 239! This process can extract up to 100x the energy from nuclear fuel. You know what's magic about that? Less nuclear waste produced. Also, you produce a ton of nuclear fuel this way. You can also use thorium-232, which then becomes uranium-233 after absorbing a neutron, which can in turn be used for nuclear fuel. Thorium is very cheap and very abundant. So the plutonium and uranium that is magically created through awesomely manipulating nuclear forces is then used in nuclear thermal reactors to produce power.

Nuclear proliferation!

Having a nuclear power plant does not mean you can make nuclear bombs. Nuclear bombs required U-235 enriched to a very high level. What exactly is enrichment? Natural uranium is less than a few percent U-235, the rest is U-238. The uranium comes as a solid, and is processed by making it dance with a bunch of flourine. UF is produced, which is gasified uranium. The U-238 is slightly heavier than U-235, so it very very slowly settles to the "bottom" if you spin it very fast in centrifuges. Once you have enriched it to somewhere between 5 and 8%, U-235, it is good to go into a reactor and make energy. To make a bomb, you have to enrich it to around 90%. Enriching it further gets exponentionally more difficult. Getting from 50% to 70% is much more difficult than getting it from 10% to 50%. So making bombs is hard.

What about plutonium? Seems like any fool can make plutonium. And in fact, they can! All you have to do it get some U-235, wrap it in U-238, and you have make a breeder reactor in your back yard! This seriously happened. Someone made a breeder reactor in their garage at 17. And this wasn't one of those kids that comes from a brilliant family with a ton of money that goes to work in a world famous lab and 'discovers' a new technique under the watchful eye of one of the most brilliant researchers in the world. This was your every day kid who was just really interested in something.

Except that building a nuclear weapon from plutonium is even more difficult than from uranium. Cause when you make the plutonium, you always get a large amount of another plutonium isotope. The other isotope loves to go critical much earlier than Pu-239. Remember what happens to a potentially critical nuclear reaction when the fuel gets split up? No? Remember what happened to Chernobyl when a small gas explosion spread the core out everywhere? It completely shuts down the critical reaction. In other words, plutonium loves to accidentally blow up to early and just spread itself around without going critical. Not much of a weapon there. How do we have plutonium bombs then? Really smart people made special triggering mechanisms to make this happen. How do they do this? I dunno. If I did, I wouldn't be out in public writing a blog, I'd be doing super secret awesome research somewhere.

Turns out that only the US and a handful of other countries have figured this one out. So while any old fool can make a breeder reactor, the combined science of most nations is not good enough to figure out how to do it.

One last thing. If nuclear power is so difficult, how did so many countries get it? Well, US and Russia developed it. The US gave it to China at some point to balance some power issues with the Soviet Union. The US gave it to several other allies as well. The Soviet union gave it out some, too. China then distributed to crazies like North Korea years later, and Pakistan and India were given it through similar pathways. In other words, it is still pretty difficult to develop.

Hey, I just covered 4 whole things in one post, and managed to get more terrible jokes in. Awesome.

Aww darn, I forgot to include the small amount of original research I did on this topic. Next article

Thanks for reading

-Jason

Nuclear Disasters

Nuclear meltdowns are scary things. Most people don't understand what a nuclear reaction is. They just know it is big. Three major meltdowns have occurred: Three Mile Island, Chernobyl, and Fukushima. Most people know about the last two; Chernobyl was a true disaster, and Fukushima still is leaking radiation into the ocean. Fukushima in particular would have been easy to prevent at two stages: building a higher protective wall around the plant, and flooding the reactor early. Zero people died in Fukushima and Three Mile. Compare that to the disaster that is 11,000 premature deaths and 24,000 heart attacks per year caused in the US alone by burning coal. Moreover, modern nuclear power plants are designed to prevent these accidents from happening.

Three Mile Island

Three Mile Island occurred in 1979 in PA. A problem began, and human error allowed it to persist. A pressure release valve was stuck open. The valve allowed some irradiated coolant to escape. A poorly trained operator was not familiar with the interface and confused the warning for the loss of coolant (the human-computer interfaces were new and not well designed). When the reactor began to overheat, the control rods were fully inserted. Remnant decay heat persisted, but the chain reaction was halted. Unfortunately, the plant had its emergency cooling pumps shut down for maintenance. You would think that there would be a rule saying that if the emergency cooling pumps were shut down for maintenance, that the plant itself should shut down, right? Well, there was such a rule. It is one the the key rules that the Nuclear Regulatory Commission laid down. The plant was in violation of this key rule.

A series of events followed where the cladding of the nuclear fuel rods melted. Some radioactive gas was released into the environment. The average person living within a 10 mile radius was dosed with about 8 millirem (a measure of radioactivity). This is the equivalent to a single chest x-ray. The average person living in a high altitude city, like Denver, CO, gets 100 extra mrem a year just by being closer to the sun. The average US citizen gets 300mrem a year from the environment. A round-trip flight from New York to Europe will dose you with 3mrem. In other words, this was negligible. The consensus of epidemiological studies since shows no increase in cancer rates from this event.

One a 1-10 screw up scale, this was about a 6. The operators failed to recognize it as a loss-of-coolant event, and allowed the core to overheat. Not a single person died as a result. All the containment methods, which are 1970s technology and design, worked. The only loss was an economic one. To the tune of about $2 billion.

Chernobyl

Location of the Chernobyl plant, and the spread of radiation contamination afterwards

Location of the Chernobyl plant, and the spread of radiation contamination afterwards

Chernobyl. April 26, 1986. A real, unshielded nuclear meltdown occurred. Chernobyl did not have the containment building that most other reactors had. In other words, outside of the reactor pressure vessel, there was nothing to contain leaks or explosions. 31 people died that night, and most serious epidemiological studies indicate the total death toll (counting increased incidences of cancer) has caused about 5000 premature deaths in Europe to date. Total increase in cancer by 2065 is estimated to be about 40,000 (not all of these lead to death). Let's be very clear on this. The worst nuclear disaster in history, which has proven to be avoidable just by building a concrete building around it, will have caused 40,000 cancer-related premature deaths in 80 years. This also happens to be the sum total of deaths caused by nuclear. If you look at actual deaths caused in the US alone by coal in the past 80 years, you are looking at numbers close to 1.6 million (about 20k deaths annually in the 70 years prior to strict limitations in 2004, 11k annually since then). This is a conservative estimate, not accounting for likely increase in death through the years when there were no emissions limitations. The number of heart attacks caused by coal emissions over this period is likely double this. Also compare those 40,000 increased cancer incidences to the literally hundreds of millions of unrelated cancer cases that will have occurred over that same 80 year period in Europe alone. 40,000 compared to 1,600,000, the latter produced in an era of much lower population, is pretty staggering. These numbers speak for themselves. Also compare this to the 17,000 deaths that have occurred from airplanes in the 13 years of 1999-2011.

Now that we know the death toll of Chernobyl, and we have a comparison of other deaths, let's talk about this catastrophic failure. It was a very complicated series of events, one that I could write several posts about. Instead, I will direct you to the Wikipedia article. The short version is that they were running some safety tests. They were instructed by Kiev to hold off their tests by 12 hours, making the test run during the overnight shift instead of the shift that was trained to run the test. At the end of the safety tests, they tried to insert the control rods back into the core. Because of several anomalies caused by having moved the test time, there was a minor explosion in the core as the rods were inserted. They were only 1/3 of the way in, and they broke off, preventing full insertion. Unlike modern control rods, these control rods were made of graphite. Graphite is a good moderator, but it also burns really well at high temperature. The lack of control rods allowed a small nuclear chain reaction to happen. This reaction was self-limiting; the energy from the reaction blew the fuel rods apart, making it so there was not enough uranium in one place to continue the reaction. The explosion, however, ripped through the pressure vessel and allowed atmosphere to come in. Air contains O2. Graphite is carbon. Carbon is what burns in coal to produce heat. The heat of the overheated reactor combined with the influx of oxygen was enough to make the graphite burn. This helped spread out the radioactive material. There was no giant concrete containment structure to contain it (remember how Three Mile island had a containment structure, and it worked? So did Fukushima.). The burning graphite spread radioactive material very far.

On a 1 to 10 scale of screw up, this was a 10. Bad idea to do safety tests.

Fukushima

The reactor that blew. https://share.sandia.gov/news/resources/news_releases/images/2012/Fukushima.jpg

Fukushima is still being studied. The latest reports indicate that people living within the immediate vicinity of the plant received 10mrem dosing. Again, this is the dosage a person gets every 10 days just for living on Earth. There have been no increases in cancer, nor is there expected to be any. There are some serious ecological impacts to be dealt with. There are some regions in the immediate vicinity of Fukushima that won't be able to produce agriculture for as much as 20 years. Other areas are uninhabitable for that amount of time. The region groundwater around Fukushima Daiichi is still contaminated and likely will be until a 100 foot deep wall of concrete and steel is built as a containment wall around it. It still leaks radiation into the ocean today. Nonetheless, no one has died from the incident. It could have easily been prevented in two circumstances. An event like this wouldn't even be possible in a modern nuclear power plant, as we will see.

Fukushima Daiichi's emergency backup generators kicked in after the 9.1 magnitude earthquake shut down the power grid. The ensuing tidal wave washed over the protective barrier of the power plant and inundated the generators. They shut down. The emergency backup batteries lasted 8 hours. Then cooling pumps stopped. This is known as a triple power failure. It is something that had been written about in the past for many plants, with measures taken against in. It was something written about with this particular plant, with no measures taken against it. TEPCO was warned by a governmental agency two years prior to this event that their sea walls were not tall enough.

Fukushima Location. http://www.cdc.gov/niosh/topics/radiation/images/JapanMap.png

What happened next is that the core melted down. They should have flooded the core with seawater and destroyed the reactor (seawater is pretty corrosive), but the plant operator thought they could contain the situation without destroying the reactor. They were wrong, and the consequences were a full nuclear meltdown. Heat and pressure built up and the explosion could not be easily contained. The surrounding area had to be evacuated. Even in all of this mess, no one was exposed to sufficient radiation to matter, and the situation is handled. It is an environmental disaster, yes. But let's compare this to coal fired power plants. Where do you think all that mercury in the fish over the entire planet comes from? Coal fired power plants.

More importantly, the new generation of power plants would prevent this type of event from happening. The emergency cooling water reservoir is contained above the core. In the event of power loss, the water can dump into the reactor using gravity. No Fukushima, no explosion and radiation.

This post is getting long, but before we go, let's visit one point we have touched on. Nuclear power has risks. Coal power has definite consequences. Far more people die from coal than from nuclear power. Grossly more. Nuclear is still scary to most people, and likely not to win the PR battle in the short run. And all these safety features make nuclear power pretty expensive. What are the other options? We haven't discussed hydro yet, nor wind and solar. For now, let's leave it between the big power plants. I personally believe that Fukushima was the last major learning point in nuclear power. Coal power is pretty gnarly, even at its best. Another solution is to use less energy. This is pretty tough one to make happen, and I don't see it happening any time soon. A post far in the future will grapple some of this.

That's all for now. Thanks for reading my longest article to date.

-Jason Munster

Nuclear Power Safety

Same nuclear power plant as in last post

Nuclear power plant safety has come on a long way. In the first two generations of plants, the engineers were constantly running around to keep the plant running safely. In the newer generation, the engineers main task is to prevent the power plant from shutting itself down. In other words, the plants are designed to shut themselves down safely if someone isn't there telling it not to every few minutes. Sorry, no pictures and no math this time!

Nuclear power plants have melted down. Chernobyl was a disaster. It didn't contain safety measures like a secondary containment vessel. Three mile island and Fukushima are metldowns that were contained. No one died in either three mile island or fukushima, and that no one suffered from radioactivity damage from either event. The protective measures worked. More on this later, though. This post is about these protective measures.

The first safety measure of a nuclear reactor is the control rods. In the prior post, I mentioned that a nuclear reaction occurs when a neutron is given off, which then hits another uranium molecule, causing it to split and give off more neutrons. Control rods moderate this chain reaction. If a neutron hits a control rod molecule instead of another U-235 molecule, that neutron will not participate in and prolong the chain reaction. The control rods can be moved in and out of the reactor. The further in they are, the more likely that they will interfere with the chain reaction. Dropping them in fully can shut down the chain reaction. Pulling them out fully lets the reaction occur rapidly. Control rods can be made of several different materials, each with different properties. This becomes important, because Chernobyl used a type that burned, and Fukushima used a type that makes hydrogen from water under high heat.

The next safety measure is the nuclear pressure vessel. These behemoths have nearly 7 inch thick steel walls. They contain the pressure of the heated water (or other heated material) in the core. In the event of a reactor meltdown, it can contain a low-level meltdown.

The next layer of safety is a giant concrete containment vessel. If the pressure vessel ruptures or melts (yes, a runaway nuclear reaction can melt through the containment vessel), the concrete will contain the blast. It also protects the power plant from outside threats, like small airplanes and jet fighters crashing into it.

A point to ponder: Protecting against a fully loaded passenger aircraft is not in the cards. That being said, most coal fired power plants have 30 day supplies of coal. Or, you know, 280,000 tons of coal. This would be easier for a large airplane to hit, being a giant pile as opposed to a small reactor. This coal is meant to be burnt in controlled conditions where it is entirely burnt all the bad stuff is scrubbed. Burning it outside would be an environmental disaster, and would surely cause more deaths than Fukushima and Three Mile Island (again, 0 for these two incidents). So yeah, a nuclear plant is a target, but so is a coal plant. I really hope writing about this doesn't get me added to some list somewhere.

Getting back on track, most nuclear power plants have an emergency cooling supply that can drown the reactor and cool the reaction. It renders the reactor inoperable, and the reactor will never produce power again, but it can prevent a meltdown. Older generations relied on a series of pumps to pump water in. In the event of total power failure, these won't work. Newer generations have changed this. There is a cistern of water, large enough to drown the entire reactor core, seated above the core. As long as there is electricity applied to the valve, it stays closed and the water stays where it is. In the event of a complete power failure, the valve no longer receives the signal to stay closed. It opens. The cistern of water drains into the reactor, melting it.

The next level of protection is in case of a full meltdown of the core, and a breach of the pressure vessel. Should this happen, there is a massive concrete slab that will catch the molten material and contain it. As in the case above, a massive quantity of water will drop on the material to help cool it. Some of the newest designs even have cooling pipes in the concrete that catches the molten core.

Finally, in the event of too much pressure building up in the concrete protective structure, all new nuclear power plants are required to have filtered vents to release pressure. In other words, if water starts boiling in the reactor and pressure becomes too high, the extra pressure will be released through a vent that will filter our all of the radioactive material.

Clearly all this is very expensive. In fact, the major cost of a nuclear power plant is building things that prevent any problems in the worst-case scenarios. And, as I mentioned before, they work pretty darn well in the case of epic fail meltdown.

So that's about it. The rest of the safety stuff is all related to non-proliferation to terrorist groups, and that is not science stuff, so I am going to ignore it for this post.

Thanks for reading!

-jason munster

Nuclear Power Plants!

Pretty nuclear power

A nuclear power plant and its cooling towers. Source: nuclear regulatory commission

Excellent news! I figured out inline LaTeX in wordpress, so my equations look even more baller.

If you had to guess how many pounds of coal you needed to equal the power output of a single pound of uranium for a nuclear reactor, what would you guess? 100 pounds? 1000? Try 3,000,000 pounds of coal to equal the energy in one pound of uranium. The energy contained in a nuclear reaction is immense. In a timely fashion, XKCD recently made a post about this:

Seriously. Read it all. And make sure you know what alt text is before you read it

XKCD comic about log scales. More importantly, it shows uranium is gigantically more energetic than coal. Also, note that my coal calculation have more power than his. It's cause I assumed a better burning, cleaner coal in order to be nice to coal. It's old and it's days are numbered, so we should be nice to it, no? Check out xkcd.com

This will be a three part series about nuclear power. This post gives a very brief description of how a nuclear reactor works. The next two will be what happened in Chernobyl and Fukushima, and another on how the newest generation  of nuclear reactors are much more safe than the older ones.

A nuclear power plant is basically your standard steam or thermal power plant. Except that it is surrounded by a ton of protection to prevent or contain explosions and nuclear fallout. Unfortunately, Cold War Russia forgot all this protection, which is why Chernobyl turned into a huge mess. Fortunately, Fukushima did have these protective measures, and no one got lethally dosed. More on this in a future post.

First, some math!

In the coal post, we showed that (extremely high quality) coal contains 34MJ per kg. Let’s figure out how much energy is in a kg of uranium!

Radiation warning symbol. Uranium is radioactive.

Radiation warning symbol. Uranium is radioactive.

We learned as kids that mass and energy are conserved. They are related by Einstein’s equation E=MC^2. When a nuclear reaction happens, the mass of resulting elements are lower than the mass of the starting elements. This energy has to be released as heat. For a nuclear reaction of U-235, ~202 MeV are released (eV is electron-volts, a unit of energy) per atom.

Seriously, how good does this math look right now?

This doesn’t sound like much, considering coal has . Lets continue with maths.

Remember Avogadro’s number? ? It’s the number of molecules to make X grams of a molecule, where X is the atomic mass. It turns out the atomic mass of U-235 is 235. Funny how that works, right?

Hokay.

This is 2.4 million times the energy density of very good coal. It is closer to 3.5 million times the energy density of coal that is typically used to generate electricity.

Nuclear power!

A nuclear power plant is a thermal power plant. It harnesses the heat of a nuclear reaction to create steam.

Uranium-235 decays naturally, releasing the massive amount of energy described above. One of the decay products, a neutron, can hit another U-235, causing that to decay. Each decay produces several neutrons. The process becomes a chain reaction that can grow exponentially.

A chain reaction image courtesy of the Nuclear Regulatory Commission

A chain reaction image courtesy of the Nuclear Regulatory Commission

U-235 is formed into pellets, and then into rods, which are put in the reactor core. The decays produce heat, which is absorbed by water, which then drives the steam cycle. To prevent a runaway reaction, control rods are inserted between the U-235 rods. These control rods absorb neutrons from the nuclear decay. Once absorbed, these neutrons cannot break another U-235. The reaction becomes controlled.

That is pretty much it. There are a ton of safety measures beyond this, however.

These reactions are contained within a reactor pressure vessel. The vessel is designed to contain the reaction. To reduce maintenance, these pressure vessels need to be a single piece. Currently only Japan, Russia, and China have the capability of building the massive pressure vessels needed for nuclear power plants. South Korea will have this capability within the next year.

Another NRC picture. Schematic block diagram of a nuclear reactor. A pressure vessel that is a single piece requires less maintenance.

The pressure vessel is the second line of defense against a reactor meltdown, after the control rods. Outside of this is a huge concrete containment structure that allows the pressure vessel to survive an earthquake, bomb, or airliner crash. It also prevents the escape of nuclear gases in the event of an accident. Chernobyl did not have one of these. All current nuclear powerplants do, making Chernobyl a non-repeating event.

A nuclear plant will produce about 20 metric tons of nuclear waste per year. The waste cools in a pool for spent fuel rods for a couple of years before being mixed with glass and stored in massive concrete cooling structures.

Can Nuclear Power Alone Replace Fossil Fuels? Unfortunately, probably not in the short term.

If the US wanted to replace all of its fossil fuel electricity with nuclear power in the next 20 years, it would have to build a lot of nuclear power plants. The US currently uses more than 250GW of installed capacity of fossil fuels for electricity. If this grows at 3% per year, we will need more than 450GW of power from this source. We would need to build 450 1GW nuclear reactors in 20 years, or nearly one every two weeks. Considering we haven't built a nuclear reactor from start to finish in over four decades, this is not an immediately solution. We have to get on building nuclear right off if we want this to be any sort of solution.

Natural Gas Prices 2

Natural gas flaring (NOAA). Often it is less expensive to burn natural gas than it is to get it to market.

Since I am in the field installing science onto an airplane, this is going to be a short post. In a prior post, I showed graphs with natural gas prices being de-coupled from oil (recreated and updated with the latest numbers here). I decided it was high time to do some maths related to it. All the data is from the EIA, and all the analysis is my own. I had to interpolate average coal prices for the past two years based on its link to specific coal prices.

If you know what correlation is (I think most of you do), skip over the description of correlation and go straight to Maths, since it is very rudimentary, and you could probably make fun of me for writing it. If you want to do better statistics with the data set, let me know and we can have some fun.

One important point! These prices are well-head prices. In other words, it is roughly what the major distributors of gas will pay for the stuff. Your prices as and end-consumer won't change. In other words, they pay less when the price goes down, but they sell you to at the same price. That works out pretty well for them, doesn't it?

Description of Correlation and its Limitations

Correlation: correlation is a measure of how closely two data sets match. In other words, correlation answers the question: when one set of data goes up, does the other go up? It is important to remember that correlation does not imply causation. In the case of natural resources, this idea is very easy to understand. The price of oil and natural gas both rose together in the 90s. This does not mean that the price of oil rose on its own, causing the price of natural gas to rise. Natural gas prices rose for pretty much the same reasons as oil prices rose. In this case, demand for things that burn and produce heat caused an increase in price in both of them.

Long-term prices 1-13

Wellhead hydrocarbon prices over the past 3 decades. The price of natural gas used to follow the price of oil. In 2008 this changed thanks to hydrofracking.

A classic example of the abuse of correlation and causation is ice cream and murders. Both murder rates and ice cream purchases tend to rise in cities at the same time. One could conclude that ice cream causes murderous rampages, or that the best way to relax after murder is to eat ice cream. Both of these are silly to conclude. More likely, there is an outside factor that causes both. It could be hotter weather makes people eat more ice cream, and simultaneously makes them more irritable. Or it could be that hotter weather makes people eat more ice cream, and it also makes more people be outside, where they are more likely to get murdered than in their homes. The point is that correlation can show that two factors are tied together, but often requires more than that to show a direct causal link.

Hokay. Correlation goes from -1 to 1. 0 means no correlation, 1 means perfect positive correlation: one thing rises, the other one rises by a predictable amount. -1 means perfect negative correlation: one thing rises and the other falls by a predictable amount.

The Maths!

NG correlations

The overall correlation between oil and natural gas prices from 1986 to 2012 is .68. This is pretty good for noisy data sets (noisy meaning there are outside factors, like commodity speculation in the markets). The correlation between natural gas and coal over that period is .4. This is pretty low, and partially represents inflationary increases in prices of both of these over time (if I had used real 2005 dollars instead of nominal dollars, all of these correlations might decrease).

More important is breaking out the correlations between early and late. I mentioned in the prior price post that decoupling began to happen in 2007, and then accelerated. The 22 year correlation between gas and oil until end of 2008 was .88, very high, much higher than .68. After this, the gas:oil correlation becomes -.23. The prices have become decoupled. At the same time, the correlation between gas and coal rises to .69. Not great, but definitely more coupled than gas and oil currently are.

One thing is clear about natural gas prices and correlation. Natural gas prices in the US used to be tightly coupled to oil prices. Natural gas prices in the US are no longer coupled to oil prices. They are instead coupled to coal prices, though not as tightly as the prices used to be coupled to oil prices.

Hydrocarbon prices per million BTU after hydrofracking. Pretty easy to see that decoupling, eh?

Hydrocarbon prices per million BTU after hydrofracking. Pretty easy to see that decoupling, eh?

Now we discuss the cause. The cause in this case is definitely hydrofracking in the US. Outside the US, oil and gas prices are still more correlated. Okay, that was a short discussion.

Some caveats: the numbers I used for historic coal prices are mean annual coal spot prices weighted for what was bought. These are correlated to monthly oil and gas prices. These coal prices were not available for the last two years. They are, however, tightly coupled to coal prices in general. I looked at similar priced coal over the two years, and extrapolated the prices for my model based on these. Given the very tight link of mean coal prices to the price of specific types of coal, this is not a faulty method. If someone were to use a more consistent methodology to determine coal prices throughout the entire time period I have sampled, it would produce results that are nearly identical.

Conclusions

Oil prices and natural gas prices were historically tied. With the advent of fracking in the US, natural gas prices decoupled from oil prices, and have coupled with coal prices.

So much for a short post, eh?

Hydraulic Fracturing!

Fractured Shale and pipe

Schematic of what hydrofracking does to the surrounding rock. Source

This is one of my favorite topics! Hydrofracking (short for hydraulic fracturing) is used to extract both natural gas (Barnett and Marcellus Shales) and oil (Bakken Shale, a few other places) from regions that used to be too dense to extract hydrocarbons from, or that would otherwise not produce much.

These dense rocks, called “tight formations” (formations meaning rock beds, tight meaning not having connected holes) are not permeable enough for hydrocarbons to move out of them at high flow rates. (Permeability means fluids can flow through something. Paper towel is permeable, plastic is not.) Believe it or not, many types of rocks are very permeable. They have lots of interconnected cracks. Shale is not such a rock. It may have space inside it with oil or gas, but these spaces are not connected by the cracks that would allow these hydrocarbons to flow out to a well. A well drilled vertically into this shale would produce almost nothing. These hydrocarbons stayed in the ground. Hydrofracking changed that.

Hydrofracking

Hydrofracking, in short, is exploding cracks and holes in the ground with shaped charges and water and then pounding sand into those holes. Hydrofracking requires 2 to 3 million gallons of water and 2 to 3 million pounds of sand per well.

Hydraulic Fracturing first requires drilling a hole in the ground. These holes can be kilometers deep. The advent of horizontal drilling allows for drilling horizontally by bending the steel tubes of the well. Sounds crazy that steel can bend? Given 300 feet of pipe, the steel pipes can bend  at a right angle. Horizontal drilling can cost up to 4x what normal drilling costs, so it is only used in places where it can greatly increase production. Like hydrofracking applications, where it makes a well go from zero production to up to 2000 barrels of oil per day.

This is where the magic happens. Formations that hold oil and natural gas are often horizontal. First a vertical well is drilled, then it goes horizontal for up to 10km. For hydraulic fracturing, shaped charges are planted inside the pipe in the horizontal section. They are then directionally exploded into the rock, creating large cracks in the rock extending away from the pipeline.

Next they pressurize a viscous fluid and cram it into the drilled hole using dozens of pumps to create massive pressure. This process can take dozens of trucks work of fluid, pipelines, and pumps. The trucks gang-pump fluid into the hole. The fluid finds the cracks in the pipe and rock made by the shaped charges. The fluid rips through the rock, rending the cracks, expanding them in length and volume and connecting them. These cracks become very widespread. The former tight shale or sandstone formation that prevented the flow of fluids is now a series of connected cracks leading to the pipeline. Fluids can flow.

Hydrofracking pump trucks

Dozens of hydrofracking trucks pump hydrofracking fluid into the hole. Source.

When the hydrofracking fluid is drained, the cracks can close up again. To prevent this, something called a proppant is used. A proppant props open the cracks, much like leaving a door stopper in your door. Typically sand was used for this, but new proppants with special shapes and properties are being used as well, like ceramic beads covered in resin for deeper wells. The proppant is put in at the same time as the hydrofracking fluid. When the trucks reverse the flow of hydrofracking fluid and pump it back out, the proppant remains behind.

Fracking Proppant

Proppants hold the cracks open after the hydrofracking fluid is drained. Source

Proppants hold open the rock and allow flow, but this is not permanent. Flow reduces over time. The first year after hydrofracking happens is the most productive. Drilling and hydrofracking a hole, then closing it, reduces the hydrocarbons you will get out of the hole compared to drilling and pumping. If you frack a hole and then close it, the hole will ultimately produce a lot less hydrocarbons than if you drill and pump. In other words, once you have fracked, you gotta make use of that hole or you will lose a lot of money.

Natural Gas hydrofracking

Natural gas hydrofracking in the US is one of the more polarizing topics. The chemicals in fracking fluid are of such low concentration that it does not matter if it gets in the local water supplies. But they mix concentrated versions of these incredibly toxic chemicals into the fracking fluid. In other words, the fracking fluid may not be toxic, but the pure chemicals they keep on-site to mix into these trucks sure are. If any of this leaks into the environment (it has), it can be quite damaging. One can hope that this sort of thing is both rare, and well-controlled in the future.

There is the leaking associated with hydrofracking for natural gas. Howarth (2012) estimated there is an upper limit of 8% of methane leaking from natural gas extraction and transport for hydrofracking. Given the factor of 23 greenhouse warming potential of methane, this is a problem. Compounding the problem is that mineral and resource policy are states rights in the US.  NY and PA do not have the law history in place or the resources to figure out how to deal with the potential pollution from fracking, nor the resources to enforce the policy. This, in part, is why fracking has been stalled in the Marcellus in many places.

Oil hydrofracking

The Bakken formation. Here the sandstone contains the oil. It is sandwiched between two impermeable layers of shale.

The Bakken formation. Here the sandstone contains the oil. It is sandwiched between two impermeable layers of shale.

There are other important implications for fracking specific to oil production. In order to drill, a company has to lease drilling rights. When a company leases drilling rights, they have obligations to produce certain amounts of hydrocarbons within a short time-frame, or they lose the lease. So they drill. A lot. Remember how we talked about holes losing productivity over time? Once a fracked hole is open, they are unlikely to close it. The problem? In the Bakken shale, they co-produce natural gas with oil. There is no infrastructure to pipe the natural gas away. They burn it instead. Some of it may leak. In other words, they are producing massive amounts of pollutants and GHGs. North Dakota does not have the ability to quickly build infrastructure to capture and transport this natural gas. And North Dakota doesn’t quite have a population that is accustomed to or capable of having a lot of bureaucracy to deal with these issues and enforcing policy. It’ll be a while before this is handled. In the meantime, North Dakota will light up the night sky like a mega-metropolis.

Bakken at night edit

The flaring of natural gas 24/7 in Bakken makes North Dakota look like it has one of the largest cities in the US. If you look at the picture below, you can see a stark contrast.

 

That light in North Dakota didn't used to be there. Courtesy Nasa

Implications

You may have heard that Hydrofracturing for natural gas is a phenomenon that is not repeatable outside the US. This is untrue. It likely cannot be repeated in Europe, but China is just discovering shale gas deposits that could rival or outsize that of the US. There are also likely large deposits in Africa. As far as shale oil goes (not to be confused with oil shale!), it is also likely available outside the US. We are just really good at getting stuff out of the ground here.

You may have also heard that this could make the US energy independent by 2035. If we don't grow our appetite for oil, this could possibly happen. It is unlikely, but that is a topic for later. The US is already one of the largest producers of oil on the planet. Is this a good thing? It is a mixed bag. It will definitely be a boon to the economy if we are not sending nearly $1 billion a day overseas to satiate our demand for oil (we use 18 million barrels a day in the US, importing 10 million of those @ $100/barrel, or a billion dollars a day). It would not prevent the middle east from getting a ton of money from oil still, as Asia and Europe will still buy all the middle east oil. It likely won't decrease the price of gas in the US, since any increase we make in production will be matched or outstripped by increased demand in China (1.3 billion people), then India (1.2 billion people), then Africa (2 billion people) in the 2nd half of the century. In other words, it won't change much on a world scale. Producing this much oil domestically also will keep the US addicted to oil, rather than transitioning to cleaner energy sources and more rational lifestyles that don't burn tons of resources. But the whole quarter of a trillion dollars per year that we aren't sending overseas, if handled properly, could easily boost our economy and help subsidize our way out of oil addiction. It's clearly a thorny topic, and beyond the scope of this post.

Conclusions

Fracking will change the energy landscape in the US by providing a lot more natural gas and oil domestically. It has downsides, from increased flaring of natural gas to domestic pollution, but it does have upsides that can be harnessed for the good of our future.

Natural Gas Power Plants

Excellent news! No math today. Bad news! There are some confusing terms here. Every thermal power plant drives a turbine to produce power. There is a special type of turbine called a gas turbine that directly burns natural gas inside of it to produce power. There are a few places where I use gas turbine and turbine in the same sentence. Sorry about that.

Natural gas fired power plants come in two primary flavors: standard thermal plants, and fancy jet turbines. The former has the same internals as a coal power plant and can provide baseload power, the latter is for peak power. Both produce less pollution than coal, simply because natural gas is cleaner than coal and produces more energy per unit CO2 emitted. Natural gas plants contribute to GHG emissions and PM2.5 (PM 2.5 can form from emissions of NOx, which occurs from any combustion). With hydrofracking causing a glut in natural gas in the US, producing power via gas is cost-competitive with coal in the US, and recently has been replacing coal to produce electricity. This has caused the US to decrease its annual CO2 emissions by nearly 10%.

Conceptual drawing of a natural gas turbine

Let’s get down into the meat of how these plants work. We have discussed how standard thermal plants work in a prior post. The jet turbine power plant is pretty simple. It is very similar to the turbines found on airplanes. The fuel is injected and burnt. It expands and drives a turbine to generate electricity. These systems get incredibly hot. They have thermal efficiencies approaching 30%. Unlike thermal plants, these gas turbines can fully ramp up power in about 20 minutes. These turbines also need to shut down frequently for repairs. Continuous operation for days at a time is not possible, or they will become very damaged. For these reasons, these turbines are typically used only for peak power production. One final difference is that a gas turbine has more like a 20 year life time, whereas a thermal power plant has a 50 year lifetime.

A natural gas turbine via DOE

Gas turbines can be combined with standard thermal plants often use what is called a combined cycle format. Before getting into that, let’s briefly revisit how a normal thermal plant has higher efficiencies. In a normal thermal power plant, the steam coming out of the first turbine has lost some heat and pressure. It is then more or less directed to a subsequent turbines that are designed to be efficient at lower temperatures, and even with wet steam. This series of turbines extracts much more heat, and thus much more efficiency, than a single-cycle turbine.

This combined cycle power plant has two sections: the thermal section and the gas turbine section. Typically the thermal section stays on. When peak electricity production is needed, the gas can go into the gas turbine instead of the thermal section. Our gas turbines discussed above produce temperatures in excess of 900 C. This waste heat can then be shunted to boil water in a more traditional thermal plant. Combining these processes together can result in a 60% thermally efficient plant. This is very efficient. If you recall from our previous article, thermal plants take a long time to ramp up power production. These combined cycle plants require the thermal section to almost always be on. The thermal section of the plant will provide baseload power, and the gas turbine part will spin up to provide peak power. These combined cycle plants are incredible versatile. They make money every day by operating in baseload configuration, and then make extra money as soon as demand requires more power.

This brings up a quick question. The thermal section of the plant is not as efficient as using both the gas turbine and the thermal section together. In other words, burning the natural gas in the gas turbine first extracts more energy from it. Why do these gas turbines not always run, then? Well, as we mentioned, the gas turbines are more fragile. They can’t always run, and they need frequent repairs. The economics of it works out so that even though they extract more energy from the gas, it is only worthwhile when electricity prices are high.

Conceptual image of a combined cycle natural gas power plant

Conceptual image of a combined cycle natural gas power plant

What are the downsides of these NG plants? They produce less pollution than coal plants by a good margin. They require less mitigation of pollutants, so they are much easier to build than coal plants, and are built more rapidly at a lower expense. They produce less GHG than coal plants, both because the combined cycle system is more efficient and because NG is a more CO2 efficient fuel than coal. They produce more pollutants than nuclear power plants or wind turbines or solar power, however. And outside of the US, the fuel is much more expensive than coal.

Let’s discuss that last point for a second. The low NG price in the US makes this very affordable. Other countries that care more about clean air than the US are not as concerned about the higher price of natural gas vs. coal electricity. They care more mitigating adverse health effects caused by coal power plant emissions. Japan is a great example. The largest importer of natural gas in the world, Japan is set to import a lot more of it. After the Fukushima Daiichi nuclear plant meltdown (future post on this and Chernobyl!), Japan is set to phase out nuclear power. They don’t want to build coal power plants, because they are dirty. They intend to import gas (they are even considering building an undersea pipeline from Russia to accomplish this!) and produce NG electricity to replace their retiring nuclear plants.

The technical section

The major emissions of these power plants are CO2, methane, and NOx. On a 100 year timescale, each molecule of methane and NOx is 21 and 310 (respectively) times more powerful than CO2. This scaling of potency is called the Greenhouse Warming Potential (GWP) of a compound. Methane is leaked from incomplete combustion and also from line leaks and delivery leaks, NOx is a byproduct of burning things in a nitrogen based atmosphere. Another way to put it: since our atmosphere is 78% nitrogen, burning anything, even a campfire, will produce NOx. In the graph below, excerpted from an NREL document , we see that while CO2 is the primary emission, multiplying these emissions by the GWP shows that methane is a significant % of total warming potential.

Nat Gas Emissions GWP

Relative to the other natural gas emissions, NOx is not important to greenhouse warming. Why would they want to control it? Because it is a precursor to PM2.5. The stuff that causes minor health issues, like heart attacks and death. NOx is mitigated by spraying ammonia (NH3) into the flu gas (flu gas is a fancy way of saying the stuff that comes out of the smokestack). The NH3 mixes with NOx to produce H2O and nitrogen. Some NOx is still is emitted after this scrubbing, and still leads to PM2.5, causing local pollution. But in much less quantity than a coal fired plant.

In review, natural gas power plants produce less pollution than coal fired power plants. There are some pretty neat technologies in these natural gas power systems. In the US, the electricity is nearly cost-competitive with coal. Other countries choose to produce power via natural gas because it is cleaner than coal, despite that it is 5x as expensive in those countries.

That’s all! Thanks for reading!